1. University Updates Mobile App's - To Get Instant Updates/Alerts : Android App & IOS App

VTU : Guidelines for conducting the IOT Experiments in 18SCNL16 / 18SCSL16

Discussion in 'Circular & Notifications' started by Rahul, Dec 5, 2018.

  1. Rahul

    Rahul Well-Known Member

    Guidelines for conducting the IOT experiments in 18SCNL16 / 18SCSL16

    List of Experiments in IOT LABORATORY WORK
    1. Transmit a string using UART
    2. Point-to-Point communication of two Motes over the radio frequency.
    3. Multi-point to single point communication of Motes over the radio frequency.LAN (Subnetting).
    4. I2C protocol study
    5. Reading Temperature and Relative Humidity value from the sensor

    One possible Firmware and Hardware Platforms
    1. Arduino UNO
    2. Arduino IDE
    3. Wireless Communication modules
    4. Temperature and humidity sensor modules
    5. LCD display

    Note: Raspberry Pi board / Beaglebone black can also be used. In these cases we need not have IDE.

    Download Official Notification Here

    Attached Files:

    Last edited: Dec 5, 2018

Share This Page